![]() You won't be disappointed-this should work in a variety of muzzleloaders designed to shoot slug or conicals. I would encourage anyone who can follow what I did, to do so. I would like to do the same thing 7.65x53 (Argentine) which has a. 318' bore for which bullets were impossible to find. 458 Winchester Mag paper patch) at 1000 yards so I have several molds for that but they are all too heavy for air rifles as they are all 450gr and above. I used to shoot 45-90 BPCR paper patch (and. 308' bullets for use in an 8mm mauser with a. Tried everything from 125 to 160 gr bullets, jacketed and cast. So far with about 100 rds fired with these thumb started bullets there have been no flyers or unexpected inaccuracy. I once read an article about paper patching bullets by Ross Seyfreid in Guns & Ammo, in which he related having paper patched Nosler. I am anxious to try some Swiss BP when I can get some. I have mounted a 20x target scope on the barrel before doing any more experimenting. At 50 yds all shots want to cut the same hole. I have only had 1 brief session with it using 60 grs of Goex 3fg and a PP bullet weighing 400 grs and sized to. So far 500 gr bullets out perform 420 gr bullets. With 80 grs of Goex 2fg and a plastic card wad over the powder, I am shooting 5 shot groups just over 1" at 50 yds and just over 2" at 100 yds-using iron sights. 456 dia.) Now I can thumb start them-not bullet starter needed. 450 so I took the hollow based bullets I have been swaging for my Sharps and rolled them in sizing lube and ran them thru a. I built a 45 cal muzzle with 1-18 twist to shoot paper patched bullets. So I thought I would share my latest project with you.
0 Comments
Leave a Reply. |